ASSEMBLY AND SET-UP
❑Attaching the Rear Caster Wheels
1 Insert large spacer into wheel | 2 Insert one small spacer between | 3 Insert Allen socket screw |
and insert bearings into each side | wheel and caster and align holes. | through caster, small spacer and |
of wheel. Make sure all holes are | Insert axle bolt through caster, small | into axle bolt. Tighten with 5mm |
aligned. Insert wheel into caster. | spacer, wheel and into small spacer | hexagonal wrench on both sides. |
| on other side of wheel. |
|
4 Locate the threaded hole | 5 Tighten with 5mm hexagonal |
on the rear underside of frame. | wrench. |
Screw caster wheel into hole. |
|
❑Attaching the Seat
1 Remove the four Allen socket | 2 Align four holes in seat with | 3 Secure with Allen socket |
screws and Allen long screws | four holes in frame. Insert Allen | screws. Tighten screws with two |
from the frame with two 5mm | long screws through the bottom of | 5mm hexagonal wrenches. One on |
hexagonal wrenches. One on top | the frame. | top and one on bottom. |
and one on bottom. |
|
|
Need Help? Visit our web site for replacement parts, product support, live chat and a list of authorized service centers at www.razor.com or call
4
