Razor Bistro 15130640 Repair and Maintenance, Adjusting the Brakes, Inflating the Tires

REPAIR AND MAINTENANCE

Check the Razor web site for any updates on the latest repair and maintenance procedures.

Turn power switch off before conducting any maintenance procedures.

❑Adjusting the Brakes

1 To adjust the play, thread the	2 If the brake lever adjuster is
brake lever adjuster in or out 1/4	threaded outward and the brake
to 1/2 turn until the desired brake	still has too much slack, use the
adjustment is attained. Most	rear brake adjuster for additional
adjustments are complete at this	adjustment.
step. If brake still needs further
adjustment, proceed to step 2.

❑Inflating the Tires

Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and your purchase.

1Using a bicycle style tire pump equipped for a Schrader-type valve, inflate the front tire to the PSI indicated on the sidewall of the tire.

Note: The pressurized air supplies found at gasoline stations are designed to inflate high-volume automobile tires. If you decide to use such an air supply to inflate your Pocket Mod tires, first make sure the pressure gauge is working, then use very short bursts to inflate to the correct PSI. If you inadvertently over-inflate the

tire, release the excess pressure immediately.

4