![](/images/new-backgrounds/1296725/29672511x1.webp)
Repair and Maintenance
qFront Wheel Replacement
Tools required: 10mm wrench, two (2) 17mm wrenches and a flathead screwdriver.
1 Using a 10mm open wrench, | 2 Using two 17mm wrenches, |
loosen the brake cable bolt. | loosen the locknuts by turn- |
| ing the wrenches counter |
| clockwise. Remove wheel and |
| install replacement wheel. |
qChain and Rear Wheel Replacement
Tools required: Phillips screwdriver, 10mm wrench, two (2) 8mm wrenches, and two (2) 13mm wrenches.
1 With a Phillips screwdriver, | 2 Using two 13mm wrenches, | 3 To loosen the chain, push the |
loosen the two screws and | loosen the locknuts by turning | tensioner down to create some |
remove the chain guard. | the wrenches counter clockwise. | slack in the chain. |
4 Remove wheel and install | 5 Push the chain tensioner | 6 With two 13mm wrenches, |
replacement wheel. | down to install the chain on | |
(Note the sequence of the | both sprockets. |
|
hardware) |
|
|
7
5
Note: Front wheel hardware sequence
8-2
8-2
8-2
Right Side (Throttle)
Fork
Middle
Left Side (Brake)
Fork
Note: Rear wheel hardware sequence
Right Side (Throttle)
Frame
Left Side (Brake)
Frame