Razor E125, E325S Charger gets warm during use, Scooter makes loud noises or grinding sounds

TROUBLESHOOTING GUIDE

Problem

Sometimes the scooter doesn’t run, but other times it does

Charger gets warm during use

Scooter does not stop when applying the brake

Scooter makes loud noises or grinding sounds

Possible Cause

Brakes are not adjusted properly Loose wires or connectors

Motor or electrical switch damage

Normal response to charger use

Brakes are not adjusted properly Chain is too dry

Brake rotor is dragging on brake pads

Solution

Refer to adjusting the brakes instructions on page 4.

Check all wires around the motors and all connectors to make sure they are tight.

Contact your local Razor authorized service center for diagnosis and repair.

No action required. This is normal for some chargers and is no cause for concern. If your charger does not get warm during use, it does not mean that it is not working properly.

Refer to adjusting the brakes instructions on page 4.

Apply a lubricant such as 3 in 1 TM or Tri-FlowTMto the chain.

Use your fingers to twist the caliper adjuster in either direction until rotor is centered between pads

Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com

or call toll-free at 866-467-2967Monday - Friday 8:00 AM - 5 :00 PM Pacific Time.

12

E_Series_Manualv10.indd 13 3/10/06 2:11:11 PM