![](/images/new-backgrounds/1134728/13472815x1.webp)
Repair and Maintenance
qChain and Tire Replacement – MX500 / MX650
Tools required: Phillips screwdriver and two (2) 17mm wrenches.
1Loosen screw and remove chain guard.
4Pull the wheel out. Note the arrangement of the hardware sequence.
2Loosen the rear axle by attaching wrenches to both axle nuts and loosening counter- clockwise.
5Install the new chain or wheel by slipping the chain around the axle. Slide the axle into the slots on the frame. Slide the chain tensioner down and maneuver the chain onto the rear sprocket and front sprocket.
3Push the chain tensioner down to slacken the chain and disengage the chain from the wheel sprocket and motor sprocket. Pull the wheel downward.
Note: Your hands will get greasy doing this.
6
7