Introduction

Congratulations on your purchase of an RBH Sound Amplifier! Your amplifier is the result of many years of research and development dedicated to producing powerful, accurate bass in home audio systems. This manual contains operating procedures and specifications. We recommend you thoroughly read through the material contained in this manual before connecting your amplifier. This will ensure you have an understanding of how to setup and operate your amplifier

for optimum performance.

Important Safety Instructions

The lightning flash with the arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

When using your amplifier, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury.

1.Read and understand all instructions in the users manual before operating the amplifier.

2.Retain this user manual for future reference.

3.Follow all warnings and instructions in this manual and any marked on the back of the amplifier.

4.The amplifier should be connected to a power supply compatible with the power consumption requirements, see the specifications section of this manual.

5.If mounting the amplifier on a stand, the wall, or other device only do so as recommended by an RBH Sound authorized technician.

6.Place the amplifier a safe distance from all heat sources such as radiators, stoves, or heaters.

7.Do not operate the amplifier near water—for example, near a bathtub, kitchen sink or in a wet basement; or a swimming pool.

8.Power supply cords should be routed so they are not likely to be walked on or pinched by items placed upon or against them.

9.Any service or repair required must be performed by qualified, RBH Sound authorized technician.

Amplifier Controls and Setup

WARNING! Make certain the proper power cord is being used and the AC voltage selector switch is set to either 115V or 230V to match the power voltage in your area.

This section describes the functions and/or use for each of the amplifier controls.

1.Voltage Selector Switch: Before connecting the amplifier to any power source make sure the AC Voltage Selector is set to either 115V or 230V to match the power voltage in your area.

WARNING! If the voltage setting does not match the AC power supplied, damage to the amplifier may result.

1

Page 3
Image 3
RBH Sound CA-200 owner manual Introduction, Important Safety Instructions, Amplifier Controls and Setup

CA-200 specifications

The RBH Sound CA-200 is a state-of-the-art speaker designed for audiophiles and home theater enthusiasts who demand exceptional sound quality and performance. With a sleek and modern aesthetic, it seamlessly integrates into various home environments while delivering an audio experience that captivates listeners.

One of the standout features of the CA-200 is its high-efficiency design. Utilizing advanced materials and engineering, this speaker boasts a power handling capability that allows it to reproduce sound at high volumes without distortion. This is especially important for movie enthusiasts and music lovers who want to feel every nuance of their audio experience, from the thumping bass to the delicate high notes.

The CA-200 incorporates RBH Sound's proprietary technologies, including the use of custom-engineered drivers. These drivers are designed to provide a balanced and accurate sound signature, ensuring that every note is rendered faithfully. The tweeter delivers crystal-clear highs while the mid-range and woofer work together to produce rich, full-bodied sounds that make music and films come alive.

Another notable characteristic of the CA-200 is its versatility. It can be used in various configurations, from a standalone speaker to a part of a larger surround sound system. This flexibility makes it an excellent choice for both casual listeners and dedicated audiophiles who appreciate the ability to tailor their audio setup to their specific needs.

The enclosure of the CA-200 is crafted with precision and care, utilizing materials that minimize resonance and interference. This careful construction contributes to a wider soundstage, allowing listeners to experience a more immersive audio environment. The speaker’s stylish design enables it to fit effortlessly into any room decor, making it as visually appealing as it is sonically impressive.

For connectivity, the CA-200 is designed to work with a variety of audio sources, providing options for both wired and wireless connections. This ensures compatibility with modern home entertainment systems, enhancing the overall convenience for the user.

In summary, the RBH Sound CA-200 is a remarkable speaker that combines cutting-edge technology, exceptional sound quality, and stylish design. With its high-efficiency performance, proprietary driver technology, and versatile usage options, it sets a new standard for audio excellence in the home theater and music listening arenas.