Amplifier Controls and Setup (continued)
9.High/Speaker Level Input: These binding post terminal connections are for the amplifier/ speaker level input from an amplifier or receiver.
IMPORTANT! Use either the Line Input or the High Level Input. DO NOT use them both simultaneously.
10.High Level/Speaker Output: This is a 100 Hz
11.Fuse Access: This is the power fuse access.
WARNING! In the event the fuse must be replaced, the replacement fuse must match exactly the original fuse value. If the replacement fuse is not of the same value, damage to the amplifier may result.
CAUTION! Before replacing the fuse, disconnect the power cord from the power receptacle.
CA-200 Subwoofer Amplifier Diagram
3