IF YOU PROGRAMMED YOUR LOCAL AREA
CODE IN THE SETUP MENU
1.Use the REVIEW up and down buttons to display the number you want to dial.
•If you see a number with 7 digits (i.e.
•If you see a number with 11 digits (i.e.
2.Press the DIAL button and the display shows PICKUP or ADJ. A 15 second timer will also start at this point on the upper right side of the display, letting you know the time until the unit will return to the Caller ID record. If you adjust the number to be dialed, the timer will reset after each adjustment.
3.To adjust the phone number, press the DIAL button. For instance, a
long distance code 1 +
(i.e.
4.To dial the displayed number, pick up the handset before the timer reaches 0. NOW DIALING shows in the display and the number is dialed.
IF YOU DID NOT PROGRAM YOUR LOCAL
AREA CODE IN THE SETUP MENU
1.Use the REVIEW up and down buttons to display the number you want to dial. You will only see
PB