IMPORTANT: You will have approximately 60 seconds to replace the batteries before the memories stored in the handset are lost. Please read the instructions before replacing the batteries and have the batteries ready to be inserted beforehand.
1.If both the straight and coiled line cords are already connected, disconnect them from the base unit. Place the handset off to the side.
2.Use a screwdriver to loosen the two screws on the battery doors located on the bottom of the base. Once the screws are fully loosened, (they will not come all the way out), slide the doors in the direction of the arrows.
3.Insert 4 “AA” size alkaline batteries (not included) as shown on the diagram in the battery compartments. Two batteries will be inserted for each compartment.
4.Replace the battery compartment doors securely and tighten the screws, being careful not to strip the threads.
5.If the cords were previously connected,
NOTE: If the low battery icon 
appears in the display, you need to replace the batteries. It is important that you replace the batteries as soon as possible in order to maintain Caller ID operation.
During the replacing of batteries, a backup circuit in the unit will retain your stored information for up to 60 seconds. Write down any stored information you do not want erased.
IMPORTANT: If you’re not going to use the telephone for more than 30 days, remove the batteries because they can leak and damage the unit.
7
