Using the Remote Control
DVD Turns on a compatible RCA, GE, or Proscan DVD player and sets the remote to control the DVD player. Also used with the ON¥OFF button to turn on other compatible DVD players.
GUIDE If youÕre operating another component that has an electronic program guide, this button accesses the
OPEN•CLOSE In DVD mode, opens or closes the DVD disc tray for some compatible RCA, GE, and Proscan DVD players.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides transport control for some compatible
SEARCH In VCR mode, accesses Index Search feature for some compatible RCA, GE, and Proscan VCRs.
SPEED In VCR mode, selects a recording speed for some compatible RCA, GE, and Proscan VCRs.
VCR Turns on a compatible RCA, GE, or Proscan VCR and sets the remote to control the VCR. Also used with the ON¥OFF button to turn on other compatible VCRs.
ZOOM In DVD mode, zooms in on the picture for some compatible RCA, GE, and Proscan DVD players.
Using the INPUT Button
Use the INPUT button to scroll through the available Video Input Channels so you can view content coming from components you have connected to the TV.
1.Make sure the component you want to view is turned ON.
2.Press INPUT to tune to an available video input source and view the component.
3.To return to the previous channel, continue pressing INPUT.
DVD |
| ON OFF |
|
| |
VCR | TV | ON•OFF |
DVD and |
| button |
|
| |
VCR buttons |
| CH |
VOL |
| |
MUTE GO BACK |
| |
CLEAR |
| MENU |
OK
PRESETSSKIP
CC 
INFO
GUIDE
1 2 3
4 5 6
78 9
INPUT | 0 | ANTENNA |
REVERSE | PLAY | FORWARD |
RECORD | STOP | PAUSE |
AGAIN | ZOOM | OPEN CLOSE | ||||
|
|
|
|
|
|
|
SPEED SEARCH
Programming the Remote to Operate Other Components
The universal remote can be programmed to operate some brands of remote controllable VCRs and DVD players. The remote is already programmed to operate most RCA, GE, and Proscan VCRs and DVD players.
Note: The TV button can’t be programmed on this remote.
Find Out If You Need to Program the Remote
To determine whether the universal remote needs to be programmed for your VCR or DVD player, turn on the component. For example, to program the remote for a VCR, turn on the VCR. Point the remote at the VCR, and press the VCR button. Then press ON¥OFF or CH + (channel up) or CH Ð (channel down) to see if the VCR responds to the remote commands. If the component does not respond, the remote needs to be programmed.
Programming the Remote
There are two ways to program the remote control:
¥automatic code search
¥direct entry
10 | Chapter 2 |
