Telephone Operation
Making Calls in the Speakerphone mode (from the base)
1.Press the Speaker button (in base), the unit will pick the available line for you. If both lines are available, Line 1 will be used first.
Press Line 1 or Line 2 button on the base to select the line, and the base’s speaker will activate.
2.Wait for a dial tone then dial a phone number.
3.Press the Speaker button when finished.
NOTE: After pick the line, the call timer starts to run until all the calls are hung up. The timer serves for both 2 lines.
Making Call in the Speakerphone mode (from the handset)
1.Press the Speaker button to activate the speakerphone on the first available line.
Press the LINE 1 or LINE 2 soft key to select a specific line. The handset will activate the ear piece.
2.Press the Speaker button to switch to speakerphone mode.
3.Wait for a dial tone then dial the phone number.
4.Press the End button when finished.
Making Calls with the Optional Headset
1.Plug the headset into the Headset jack on the side of the base or side of the cordless handset.
2.Adjust the headset to rest comfortably on top of your head or over your ear.
3.Move the microphone to approximately 2 to 3 inches from your mouth.
4.For the base, press the Headset button on base and the phone auto- matically selects first available, if both lines are available, Line 1 will be used.
5.For the cordless handset, press the Talk button.
6.Wait for a dial tone, and then dial the phone number.
7.Press Headset button (on base) or End button (on handset) when fin- ished.
CAUTION: Use only Thomson Inc.
NOTE: If the headset is not connected (or if not completely inserted into headset jack), an error tone is heard when the Headset button is pressed.
20
