
DESKTOP INSTALLATION | NOTE: For |
| desktop charging |
1 | only, the handset |
is able to charge | |
3 | facing up or |
down.
2
4
5
1.Place the handset in the base.
2.Set the RINGER switch on the handset to ON.
3.Raise the base antenna.
4.Plug the power supply cord into the base and then into an AC outlet. The CHARGE/IN USE light comes on indicating that the battery is charging.
Allow the phone to charge for 12 hours before using the first time. If you don't charge the phone properly (for 12 hours) when you first set up the phone, perfomance of the battery will be compromised.
5.After charging, connect the telephone cord to the phone and then to the wall jack.
NOTE : The phone automatically defaults to
CAUTION: Use only the Thomson
6