SETTING THE DISPLAY LANGUAGE
1.Press the flash/program button until 1ENGLISH 2FRA 3ESP shows in the display.
2.Use the CID (up or down arrow) button or the handset number pad to enter your selection.
3.Press flash/program to confirm.
SETTING THE LOCAL AREA CODE
1.Press the flash/program button until SET AREA CODE shows in the display.
2.Use the number pad to enter the area code.
3.Press flash/program to confirm and exit setup.
NOTE: If you find it necessary to dial all local calls with the area codes included, press and release flash/program, until SET AREA CODE is displayed. Then enter "000." Press flash/program again to confirm.
SETTING THE RINGER TONE
1.Press the flash/program button until SET RINGERTONE shows in the display.
2.Use the CID review (up or down arrow) button or the handset number pad to enter your selection.
3.Press flash/program to confirm.
15