Basic TV to VCR Connection
The basic component (VCR, DVD player etc.) to TV connection is described below. For other hookups, refer to your component’s instruction manual.
Connect the audio cables (white and red) to the AUDIO INPUT jacks on the TV and to the AUDIO OUT jacks on the VCR (or other component). Match the cable color to the jack color.
If your component has an
Connect a video cable (yellow) to the VIDEO INPUT jack on the TV and to the VIDEO OUT jack on your VCR (or other component).
Turn on the TV and the other component.
Press the INPUT button on the remote control until the correct video input channel appears in the upper right corner of the TV screen. When you play material on the VCR, DVD player, etc. that is connected to the AUDIO and VIDEO jacks it will appear on the TV on the video input channel. (The bottom of page 4 has a complete list.)
75 OHM
INPUTOUTPUT ANTENNA INPUT
VIDEO VIDEO
L(mono) | L | (TV ANT) | ||
AUDIO | AUDIO | |||
| ||||
|
| |||
| R | R |
|
Model 24F512T back panel
75OHM
ANTENNA
INPUT
|
| |
INPUT | (TV ANT) | |
|
| |
| OUTPUT |
|
Models 14F512T, 20F511T, 20F512T back panel
|
|
| VIDEO IN | (INPUT) |
|
|
| VIDEO | TV ANT |
R | AUDIO | L | (75 OHM | |
|
| |||
L(MONO) |
| AUDIO | ANTENNA | |
|
|
| R | INPUT) |
| VIDEO | Models 27V412T, 27V512T and 27V513T back panel | ||
|
|
Please note that models 27V412T, 27V512T and 27V513T have only AV
Side (front) AVinputs. panel (all models)
Helpful Hints
Audio and video cables are not supplied with the TV. Audio cables are usually red and white. Video cables are usually yellow.
Your VCR may not have Audio and Video Out jacks, but only an RF or ANTENNA OUT jack.
Use a coaxial cable to connect the VCR’s ANTENNA OUT jack to the TV’s 75 OHM ANTENNA INPUT jack.
Use either the
This would interfere with the picture display. If both are used,