1 SpeedTouch™ Installation
E-DOC-CTC-20031204-0011 v2.0 13
3Windows will automatically recognize the THOMSON USB Remote NDIS device:
4The Windows Found New Hardware Wizard ap pears:
This wizard will guide you through the installation procedure of the SpeedTouch™
USB drivers.
Click Next to continue.
5The following windows of the Found New Hardware Wizard allow you to select
locations where it should search for drivers:
Insert the SpeedTouch™ Setup CD-ROM, make sure that the wizard looks for the
drivers on the CD-ROM drive and click Next to continue.
6The wizard will notify that it found drivers for the THOMSON USB Remote NDIS
device on the CD-ROM.
Click Next to continue.
7The installation procedure continues with the installation of the USB Remote
NDIS drivers.
8In the following windows you can follow the installation procedure. Click Next
whenever requested to continue the installation.
9At the end of the procedure, the following window appears:
Click Finish to complete the installation.
10 As a result your USB connection is installed and ready for use.