4 Support
E-DOC-CTC-20031204-0011 v2.0
52
4.3 Resetting the SpeedTouch™Reset to default
configuration
Proceed as follows:
1Make sure the SpeedTouch™ is powered on (Power LED is solid green).
2Use a pencil to press the recessed reset button (D) on the SpeedTouch™ rear
panel for at least six seconds until all the LEDs on the front panel turn off
3As soon as all the LEDs on the front panel go off, release the reset button. This
indicates that the SpeedTouch™ is restarting in its default configuration.
Note Make sure to release the reset button as soon as all the LEDs have
gone off to prevent that the SpeedTouch™ enters BootP mode.
The SpeedTouch™ will come online again with default settings.
D