4 Support
E-DOC-CTC-20031204-0011 v2.0 39
Configuration of the
SpeedTouch™ (and PC)
Proceed as follows:
1As soon as the SpeedTouch™ Setup wizard has detected your SpeedTouch™
device, you can proceed with the configuration procedure.
Note If the SpeedTouch™ has been configured before:
•It may be protected by a system password. You must provide
user name and system password before you can view the device
details or continue with the configuration.
•You will be asked to choose between reconfiguring your Speed-
Touch™ or changing your Local Area Network configuration.
Select Reconfigure the SpeedTouch™ and click Next.
2The following window invites you to select the appropriate service for your Inter-
net connectivity:
Select region, Provider and Service as specified by your Service Provider and click
Next to continue.
Note If the Service Provider has included a separate disk with a dedicated
service profile, click Have Disk to navigate to the location of the appro-
priate Service template file.
3Subsequent screens will guide you through the configuration setup of both the
SpeedTouch™ and your PC. Follow the instructions and enter the required infor-
mation whenever needed. The requested information will depend on the selected
Service profile and should be provided by your Service Provider.
Click Next whenever requested.
4The SpeedTouch™ Setup wizard will update the SpeedTouch™ configuration and
your PC’s configuration according the Service profile. You can follow the configu-
ration progress in following window: