RCA 600-Watt manual Using the Tuner

FM MODE

TUNING MODE

Press REPEAT during playback or when the player is stopped. Each time you press this button, the repeat mode displayed on the TV screen changes between REPEAT ONE, REPEAT ALL, and REPEAT OFF.

If you select REPEAT ONE the disc repeats a file.

If you select REPEAT ALL the disc repeats a folder.

Note: If the DVD player cannot read an MP3 file properly,? appears before the file name on the TV screen.

MP3 Random Play

The DVD player can randomly play MP3 files in the folder.

Press RANDOM during playback or when the player is stopped. The TV screen will display either RANDOM ON, or RANDOM OFF.

Pressing RANDOM during playback when random mode is already on halts playback. RANDOM OFF appears on the TV screen.

Note: PRESET ) will not perform the skip back to the beginning of a track when RANDOM and REPEAT All are used simultaneously.

USING THE TUNER

1.Press POWER. The receiver defaults to the last selected function, which appears in the display panel.

2.Press TUNER on the remote, or rotate FUNCTION on the receiver until JKD;H appears in the display.

3.Press BAND to select the desired band (7C or <C).

4.Repeatedly press PRESET ) or - on the remote, or TUNING/PRESET )# or ,- on the receiver to tune in the desired station. When you reach a station, Jkd[Z appears above the station number.

To change the frequency by one step, quickly press and

release PRESET ) or - (or TUNING/PRESET )# or

,-).

To tune to the next clear frequency, hold down PRESET ) or - (or TUNING/PRESET )# or ,-), then release the button. The system automatically tunes to the next strong station.

Listening To FM Stereo Broadcasts

In FM mode, press to select stereo or mono. When you select the stereo mode, IJ appears to the right of Jkd[Z when the tuner is receiving a stereo station. It goes off when you select mono.

When you listen to very weak FM stereo stations, you might hear higher-than-normal background hiss. Switch to mono to eliminate the hiss.

Presetting Radio Stations

You can preset 30 AM and 30 FM stations regardless of the reception. Tune in the desired stations using auto or manual tuning.

Manual Preset

1.Press BAND to select 7C or <C.

2.Press TUNING MODE.

3.Repeatedly press PRESET ) or - (or TUNING/PRESET )# or ,- on the receiver) to tune in the desired station.

To change the frequency by one step, quickly press and

release PRESET ) or - (or TUNING/PRESET )# or

,- on the receiver).

To tune to the next clear frequency, hold down PRESET ) or -ý(orTUNING/PRESET )# or ,- on the receiver), then release the button. The system automatically tunes to the next strong station.

4.Press MEMORY. C;CE flashes for 5 seconds.

5.While C;CE flashes, press PRESET ) or -ýon the remote or TUNING/PRESET )# or ,- on the receiver to select the desired preset number.

Note: If C;CE goes off before you select the desired preset number, press MEMORY again (C;CE flashes again).

6.Press MEMORY again or wait until C;CE stops flashing.

7.Repeat Steps 2–6 to memorize other stations (up to 30 stations for each band). If you store a new station in an occupied memory location, the old station is replaced with the new one.

To store stations on the other band, repeat Steps 1–6, substituting the other band in Step 1.

Note: If you want to store more stations later, you might find that pressing PRESET ) or - (or TUNING/PRESET )# or ,- on the receiver) only moves the tuner to the next preset station (instead of moving the frequency one step). If this

happens, pressto return to manual tuning (see “Switching Between Preset Stations and Manual Tuning”).

Auto Preset

1.Press BAND to select the desired band.

2.Hold down MEMORY for about 3 seconds.

3.The tuner automatically begins scanning, and stores the first 30 strong signals it receives.

4.Scanning stops automatically after radio stations have been stored in the auto preset memory.

19