Box contents
The following items are included:
RCA Digital TV Converter Box
Quick Start |
| User Manual |
Guide |
| (this booklet) |
|
|
|
RF coaxial cable | Remote control | |
|
| |
+ | - |
|
+ | - |
|
2 AAA Batteries |
| |
Setting up
Step 1: Installation
The Converter Box can be installed either horizontally or vertically. The left side of the Converter Box can be rotated as a stand for vertical installation.
Bottom view
Vertical installation (recommended)
Step 2: Connections
Option 1: Basic connection to TV
(Optional) | AC120V |
| |
| 60Hz |
From antenna
Tip:
U s i n g t h e o p t i o n a l Au d i o / Vi d e o c a b l e connection provides better picture quality in case your TV set has Audio/Video input available.
Horizontal installation
1Connect your existing antenna cable to the ANTENNA IN jack of the Converter Box.
2Connect the RF coaxial cable (supplied) from the OUTPUT TO TV jack of the Converter Box to the ANTENNA jack of the TV set.
3Slide the CH3/CH4 selector on the back of the Converter Box to the channel that is not in use in your area. The Converter Box will send its video signal to either Channel 3 or 4 on your TV.
4Connect the Audio/Video cables (not supplied) from the AUDIO / VIDEO output jacks (yellow, white, red) of the Converter Box to the Audio/Video IN jacks on the TV set. If there are more than two sets of Audio/ Video jacks on the TV set, connect only either INPUT1 or INPUT2 to those of your converter box.
5Connect the AC power cable of the Converter Box to a suitable wall outlet.
Note:
You may choose to connect the RF coaxial cable to TV, or Audio/Video cables to TV, or both the RF coaxial cable and AV cables to TV.
4
