RCA AH640R warranty Safety Features, Connecting the Inverter, Month Limited Warranty

Power Inverter, DC to AC

AH640R Users Guide

CAUTION: Be certain that product hookup/usage does not interfere with driving in any way. Some states prohibit the use of A/V equipment while driving.

This RCA brand Power Inverter lets you operate AC-powered electronic devices rated up to 400 Watts of continuous power*, such as TVs, VCRs, Video Games, Camcorders, and Notebook Computers from the 12-volt DC power supplied by your car, boat, or RV. This RCA-brand Power Inverter provides two AC outlets wherever you need one by converting the 12-volt DC (direct current) supplied in your vehicle to 110-volts AC (alternating current) found in standard household AC outlets. The AH640R also provides a USB outlet, allowing it to serve as a USB power adapter as well.

The USB power port provides up to 1000mA at 5V DC current.

IMPORTANT: Check that the inverter power is large enough to cover the required wattage of your electronic device you want to connect.

Safety Features

•Low voltage alarm – alarm sounds if input voltage drops below 11.0 volts

•Low voltage shutdown – unit automatically shuts down if input voltage drops below 11.0 volts to prevent unexpected dead car batteries

•Automatic short-circuit detection and shutdown

•Automatic overload detection and shutdown

•Thermal protection sensor—shuts the unit down if it becomes too hot

•Green power-on LED

Connecting the Inverter:

IMPORTANT NOTE: Most vehicles come equipped with a 15-amp or 20-amp fuse to the cigarette lighter. To determine the wattage capacity of your cigarette lighter outlet, multiply the amperage rating for your fuse by 12 (volts x amps = watts). For example: 12 volts x 20 amp fuse =240 watts. Connecting equipment with a combined wattage rating that exceeds the capacity of your cigarette lighter outlet may cause your vehicle’s cigarette lighter fuse to blow. Use the supplied direct battery connection adapter in these cases.

For your safety and continued fire protection, never replace a fuse with one of a higher amperage rating than the original fuse.

A.Connecting equipment that is within the capacity of your cigarette lighter outlet:

1.Connect the cable with the cigarette plug on one end by matching the red and black wires to the red and black terminals*

2.Plug the cigarette lighter plug into the cigarette lighter outlet in your vehicle.

3.Turn the on/off switch on the Power Inverter to the “on” position.

4.Plug the device you wish to use into the AC outlet on the Power Inverter.

5.Turn the power switch of the device on.

6.Use the device as you normally would.

B.Connecting equipment that exceeds the capacity of your cigarette lighter outlet.

1.Connect the cable with the two battery clips on one end by matching the red and black wires to the red and black terminals.*

2.Be sure the on/off switch on the Power Inverter is in the “off” position, then connect the black alligator clip to the negative (-) terminal on your vehicle’s battery.

3.Connect the red alligator clip to your battery’s positive (+) terminal.

4.Follow steps 3-6 above.

*Incorrectly attaching the cables may damage the unit. Such damage is not covered by the warranty.

INSTRUCTIONS FOR USING THE USB POWER PORT

After connecting the inverter with either the cigarette lighter plug or battery clips, insert an appropriate USB charging cable (not included) for the device you are trying to power into the USB power port on the front of the inverter, the USB power port will provide 5 volts DC at a maximum of 1000 mA of current, you may use the USB power port and the 120 VAC output from the inverter at the same time.

NOTES:

Depending on your vehicle, you may need to turn your ignition switch to the “on” position to provide power to the cigarette lighter outlet.

ALWAYS turn the power of a connected device off BEFORE starting your vehicle.

Never use a surge protector or power strip with the Power Inverter.

If an extension cord is required, use only an extension cord that is rated for the wattage of the connected device.

There is a fuse in the cigarette lighter plug to prevent excess power draw, through the cigarette lighter outlet. If this fuse blows, unscrew the tip and replace it with a standard automotive (glass) fuse of equivalent ampherage.

Never replace the fuse with a fuse of a different rating. Using non-equivalent fuses may result in damage to your equipment or the Power inverter and will void your warranty.

It is common for the Power Inverter’s casing and cigarette lighter plug to become hot while in use. Always place the Power Inverter in a well-ventilated area where air can flow freely to disperse the heat. Use caution when handling the Power Inverter after being used. lf the Power Inverter becomes too hot, it will shut down. Allow the Power Inverter to cool adequately before reconnecting.

Disconnect the Power Inverter from its power source when not in use.

Some electronic devices, such as TVs, require high Starting currents. If the device doesn’t immediately start, press the power switch of the device on and off 5 times until the device comes on, then release the switch. lf the device does not come on after 5 times, it cannot be used with this Power Inverter.

Be sure the combined power consumption (measured in watts) of all devices connected to the Power Inverter does not exceed the rated continuous power output of the Power Inverter.

The red LED will light under the following conditions

•Low voltage

•Excessively high voltage

•Overheating

•Overloading beyond capability of the inverter

This Power Inverter is designed for use with a 12-volt DC negative ground system. Never use this product with a 6- volt or 24-volt DC system or a positive ground system.

Improper use of this Power Inverter can cause property damage, personal injury, and/or loss of life. Do not use this Power Inverter in a location that is near flammable materials or where flammable fumes may accumulate.

WARNING: DO NOT USE FOR MEDICAL OR OTHER LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK ACTIVITIES.

*Performance issues may arise if your device requires more than 400W of continuous power.

12 Month Limited Warranty

Audiovox Electronics Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product along with any accessories included in the original packaging is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address shown below. Do not return this product to the Retailer.

This Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or Canada. The Warranty does not extend to the elimination of externally generated static or noise. This Warranty does not apply to costs incurred for installation, removal or reinstallation of the product, or, if in the Company’s opinion, the product has been damaged through acts of nature, alteration, improper installation, mishandling, misuse, neglect, accident, or the simultaneous use of different battery types (e.g. alkaline, standard or rechargeable). This Warranty does not cover damage caused by an AC adapter not provided with the product.

THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state/province to state/province.

U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, NY 11788

CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, Mississauga, Ontario L5T 3A5

Convertisseur, CC vers CA

Guide de l’utilisateur du AH640R

MISE EN GARDE : Assurez-vous que le branchement et l’utilisation de l’appareil ne nuisent pas à la conduite. Certains États/provinces interdisent l’utilisation d’appareils AV pendant la conduite.

Ce convertisseur continu-alternatif de marque RCA vous permet d’utiliser des appareils électroniques alimentés par CA jusqu’à une puissance continue de 400 watts, tels que des téléviseurs, des magnétoscopes, des jeux vidéo, des caméscopes et des ordinateurs portatifs, à l’aide de l’alimentation CC de 12 volts fournie par votre automobile, bateau ou véhicule récréatif. Ce convertisseur de marque RCA fournit deux prises CA là où vous en avez besoin en convertissant l’alimentation CC (courant continu) de 12 volts fournie par votre véhicule en alimentation CA (courant alternatif) de 110 volts telle que fournie par les prises CA résidentielles. Le AH640R fournit aussi un port USB, lui permettant d’agir comme adaptateur d’alimentation USB.

Le port d’alimentation USB fournit jusqu’à 1000 mA de courant 5 V CC.

IMPORTANT : Vérifiez que la puissance du convertisseur est suffisante pour fournir la puissance requise par l’appareil électronique que vous désirez brancher.

Caractéristiques de sécurité

•Alerte de voltage faible – une alerte sonne lorsque le voltage d’entrée tombe sous 11,0 volts

•Fermeture lors de voltage faible – l’appareil se ferme automatiquement si le voltage d’entrée tombe sous 11,0 volts, de manière à éviter de décharger la batterie du véhicule

•Détection des courts-circuits et fermeture automatiques

•Détection des surtensions et fermeture automatiques

•Capteur thermique de protection — ferme l’appareil s’il devient trop chaud

•DEL verte d’alimentation

Branchement du convertisseur :

REMARQUE IMPORTANTE : La plupart des véhicules sont dotés d’un fusible de 15 ou

20 ampères pour l’allume-cigarettes. Pour déterminer la puissance de la prise de votre allume-cigarettes, multipliez la capacité de votre fusible par 12 (volts x ampères = watts). Par exemple : 12 volts x fusible de 20 ampères = 240 watts. Le branchement d’appareils dont la consommation totale dépasse la capacité de la prise de votre allume-cigarettes peut faire fondre le fusible de l’allume-cigarettes de votre véhicule. Dans ce cas, utilisez l’adaptateur de branchement direct à la batterie fourni.

Pour votre sécurité et pour prévenir les incendies, ne remplacez jamais un fusible par un fusible de capacité supérieure.

A.Branchement d’appareils ne dépassant pas la capacité de la prise de votre allume-cigarettes :

1.Branchez l’une des terminaisons du câble pour allume-cigarettes en appairant les fils rouge et noir aux bornes rouge et noire.*

2.Branchez la fiche pour allume-cigarettes dans l’allume-cigarettes de votre véhicule.

3.Positionnez le commutateur on/off du convertisseur à la position « on ».

4.Branchez l’appareil que vous désirez utiliser dans la prise CA du convertisseur.

5.Utilisez le commutateur d’alimentation pour démarrer l’appareil.

6.Utilisez l’appareil comme à l’habitude.

B.Branchement d’appareils dépassant la capacité de la prise de votre allume-cigarettes :

1.Branchez l’une des terminaisons du câble pour batterie en appairant les fils rouge et noir aux bornes rouge et noire.*

2.Assurez-vous que le commutateur on/off du convertisseur est à la position « off » puis branchez la pince de contact noire à la borne négative (-) de la batterie de votre véhicule.

3.Branchez la pince de contact rouge à la borne positive (+) de votre batterie.

4.Suivez les étapes 3 à 6 de la rubrique ci-dessus.

*Un branchement incorrect des câbles pourrait endommager l’appareil. De tels dommages ne sont pas couverts par la garantie.

INSTRUCTIONS D’UTILISATION DU PORT D’ALIMENTATION USB

Après avoir branché le convertisseur avec la fiche pour allume-cigarettes ou les pinces pour batterie, insérez un câble de recharge USB approprié (non fourni) pour l’appareil que vous désirez alimenter dans le port d’alimentation USB situé à l’avant du convertisseur; le port d’alimentation USB fournit

un courant maximal de 1000 mA à 5 V CC. Vous pouvez utiliser le port d’alimentation USB et la sortie 120 V CA du convertisseur en même temps.

REMARQUES :

Selon le type de véhicule, vous pourriez devoir tourner le commutateur d’allumage du véhicule à la position « on » pour alimenter la prise électrique.

Fermez TOUJOURS les appareils branchés AVANT de démarrer votre véhicule.

N’utilisez pas de barre d’alimentation ou de limiteur de surtension avec le convertisseur.

Si vous devez utiliser une rallonge électrique, n’utilisez qu’une rallonge d’une