Samsung MAX-KT85Q/XFU manual Connecting the FM, AM Antennas

Models: MAX-KT85Q/XFU

1 80
Download 80 pages 61.36 Kb
Page 16
Image 16

Connecting the FM, AM Antennas

CONNECTIONS

AM Loop Antenna (supplied)

FM Antenna (supplied)

Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

FM antenna connection

AM antenna connection

1.Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

1.Connect the AM loop antenna supplied to the AM and terminals.

2.If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).

Cooling Fan

The cooling fan dissipates the heat generated inside the unit so that the unit can be operated normally. The cooling fan is activated automatically to supply cool air to the unit.

Please observe the following cautions for your safety.

Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it.

Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)

14

Page 16
Image 16
Samsung MAX-KT85Q/XFU manual Connecting the FM, AM Antennas