ANT751
Outdoor Antenna
User’s Guide
BEFORE YOU START!!!
Please read the IMPORTANT SAFETY INFORMATION sheet
included in this package.
Step 1: Unpack
Remove the antenna and the hardware bag from package. Make sure the following parts are in the package:
•Antenna
•Mounting pipe and foot
•Hardware bag
(2) | 10/32” Hex nuts | ||
Mast Clamp Insert | (5) | 1/4” Hex Nuts | |
(2) | Black Plastic Plugs | (2) | 5/8” Bolts |
Matching Transformer | 2 1/2” Screw | ||
(4) | 7/16” Washers |
|
|
Step 2: Unfold the antenna’s elements
Starting from the rear of the antenna, unfold the elements on both the top and bottom of the antenna until they lock into place (as illustrated below). Make sure the elements are flat and parallel to each other when you’ve finished.
Rear
