RCA ANT751 manual Mount the foot and pipe, Attach the antenna to the mast

Step 8: Mount the foot and pipe

Secure the foot to its permanent location.

!DJUST THE END OF THE PIPE SO THAT IT IS perpendicular to the ground. Tighten the

HEX NUTS TO HOLD THE PIPE IN PLACE

End of the pipe should be perpendicular to the ground (plumb)

Step 9: Attach the antenna to the mast

IMPORTANT: Before you attach the antenna to your mast, visit www.antennaweb.org to see the locations of your local broadcast towers. This information is crucial in pointing your antenna correctly.

Loosen the nuts on the mounting clamp

U-bolt.

Point the small end of the antenna toward the stations you want to receive.

Slide the U-bolt over the mast.

Point small end of antenna toward your local broadcast towers. Tighten the mast clamp and nuts securely.