RCA B-008ATD user manual General controls, TV controls only

•If a Smart Antenna is connected, press 1 for Quick Scan or 2 for Full Scan. A full scan with Smart Antenna may take around 40-50 minutes.

•When the scan finishes, the Channel List menu displays the found channels.

•Reposition the antenna and perform the automatic channel scan again if you cannot find all available channels.

6. The Channel List shows after scanning,						EN
press			or	to highlight a channel and
press OK to start viewing.
	Channel List
	Channel			What's on Now	What's on Next
	2-1	KTVU	Stored	Current program	Next program
2-2		KTVU	Stored	Current program	Next program
4-1		KRON Stored		Current program	Next program

•You may also hide unwanted channels, refer to “Channel List” on page 9 for details.

General controls

•The keys on the Converter Box remote control are divided into two parts. The keys shown in white in the diagram below control the Converter Box, while the grey keys control your TV set.

•You can control TV sets of all major brands after programming this remote control with the PGM key. RCA TV sets can be controlled directly without programming. Refer to “Step 3: Program the remote control” in the “Setting Up” section for details.

TV controls ONLY	Signal indicator
Turns the TV on or off	Turns the converter box on or off
	Navigates through the converter
	box menus (e.g., to move right,
Selects CH3, CH4 or	press )
	Press OK to confirm menu selections
AV INPUT channels on the TV
Mutes or restores sound	Shows or hides channel information
	(it is possible to receive some programs from
output from the TV (if the TV
	different time zones, the time information
supports this function)	might be wrong in this case)
Adjusts the TV volume	Shows or hides the main menu
	Selects the previous or next channel
	Selects channels by inputting the
	channel number
	Shortcut keys to access functions
	in the main menu
Programs the remote control so	Displays closed captioning from
that it can control your TV set.	the converter box
Refer to “Step 3: Program the	Inputs a dash (e.g., 12-1) while
remote control” for details	selecting an ATSC channel with the
	number keys (0-9)
	Insert 2 “AAA” batteries
	prior to use.
DTA800-B	7
	17/01/2008