RCA B-008ATD user manual Program the supplied remote control, Initial setup of the Converter Box

Setting up

Step 3: Program the supplied remote control

You can control TV sets of all major brands after programming the Converter Box remote control with the PGM key. RCA TV sets can be controlled directly without programming. Refer to the steps below and the separate Program Code leaflet to guide you through the programming.

1.Refer to the separate Program Code leaflet. Look for the brand of your TV set and a 3-digit program code next to it. There may be more than one program code available. Choose any one of them.

Program codes/Códigos de programa

Admiral 002, 128, 183, 189

Advent 191, 258, 260, 275

Adventura 129

• If your TV set is not on the list, skip the rest of Step 3 and go to “Step 4: Initial setup of the Converter Box”.

2.Press PGM on the remote control. The signal indicator on it remains lit.

signal indicator

3.Enter the 3-digit program code with the number keys. Press OK for confirmation. The signal indicator will be off when the program is done.

4. Press the volume keys on this remote control to check if they can adjust the volume of your TV set.

•If you fail to control your TV set, repeat steps 2 to 4 to program again. Try another program code if there is more than one for your TV brand.

•If the signal indicator remains lit after blinking four times, you may have entered the wrong code. Repeat steps 3 to 4 to program again. Make sure you have correctly entered the code.

6

•You can still use your TV remote control to turn on your TV set, select input source and control the volume.

Step 4: Initial setup of the Converter Box

1. Press BOX on the remote control to turn on the Converter Box.

2. Press TV (or use the TV remote control) to turn on the TV set.

3. Press INPUT up to four times (or use the TV remote control) to select the channel on your TV set to view images from the converter box.

•The following screen will appear on your TV when the correct channel is chosen.

Language

Choose the language to be used in the menu system.

English - 1 Menu text is displayed in English.

Español - 2 El texto del menú se exhibe en español.

Français - 3 Le texte des menus est affiché en français.

•If you cannot see the above screen on your TV set, check that:

1)if the converter box has been turned on,

2)if you have programmed the remote control so that the TV input channel can be selected correctly,

3)if you have correctly connected the TV

set with the Converter Box.

4. Press 1 (for English), 2 (for Spanish) or 3 (for French) to select the menu language.

5. Press 1 to start automatic channel search.

Channel Scan

Channel scan will search for channels available in your area. You may have to re-adjust the antenna and retry the scan to capture all available channels.

Begin - 1 Start channel search.

•To improve TV signal reception, an optional Smart Antenna which is compatible for connection with the Converter Box is recommended.

DTA800-B

17/01/2008