44 FUNCTIONS INCLUDED IN SETUP MODE
Function | MCK Position |
Restore | Enter Setup Mode and |
Factory Defaults | turn to LED D |
Display LEDs
LED D shining blue, Peg LED shines white
# 
Action
Press display once and Factory Defaults are restored
Remarks
Restoring Factory Defaults will do the following:
•Preset positions set to default tunings
•Runtime Correction Data set to default
•Dynamic Runtime Correction is switched on
•eFunction Correction is switched on
•Tuning accuracy is set to 4 out of 6
•Calibration Data is restored
Display Software | Enter Setup Mode and |
Release | turn to E LED and |
| press Enter |
Peg LED flashing sequence indicates software release edition
Press display once. Peg LED will begin flashing
Red=Major Release Number
Green=Minor Release Number
Blue=Revision Level
For Example, Software Release
2.3.5would be shown as 2 red flashes, followed by 3 green flashes, followed by 5 blue flashes
