![](/images/new-backgrounds/1245488/24548893x1.webp)
Picture is too dark
Power ON indicator is flashing
Recorded audio is too low
Viewfinder displays are out of focus
Can't see
Date and/or time were recorded on tape
For best results, only use higher shutter speeds for outdoor action you specifically intend to play back in slow motion.
Excessive moisture in camcorder. Leave power on until light stops flashing.
Maybe MIC WIND/NORMAL switch was not returned to NORMAL position after outdoors recording.
Maybe subject was too far from camcorder. For long distances, try using a wireless microphone.
Try adjusting eyepiece focus control.
CAMERA/PLAYBACK switch must be in CAMERA position.
Press DISPLAY button to bring displays to viewfinder.
Date and/or time will be recorded on tape whenever they appear in the viewfinder. Press DATE/TIME button to remove them from viewfinder when recording.
47