Connections & Setup
Eject
button
Card slot CompactFlash card compartment door
CompactFlash™ card
Inserting the
CompactFlash card
Insert the CompactFlash™ card
1.Make sure the Power dial is set to OFF.
2.Slide the CompactFlash card compartment door to the rear of the camera. (The doors springs open.)
3.Before inserting the card, make sure the Eject button is pushed in so that the door can close.
With the label of the card facing the front of the camera, fully insert the card into the slot in the camera.
4.Close the card compartment door until it snaps back into place.
Important: Never remove or insert the CompactFlash card while the camera power is on. You could corrupt the information stored on the card.
Notes:
•If you try to turn on the camera without the CompactFlash card installed, the camera beeps and will not turn on.
•This camera accepts both Type 1 and Type 2 CompactFlash cards. Type 2 cards are thicker than Type 1 cards.
Chapter 1 | 11 |
