RCA D32TF20 manual RF Jack and Coaxial Cables F-type, High Resolution Input Jack and Cables

Connections & Setup

RF Jack

RF Jack and Coaxial Cables (F-type)

The RF jack is necessary for reception of off-air broadcasts, cable, and satellite signals.

This jack is required for antenna or cable connections. The RF jack on the TV is labeled ANTENNA/CABLE INPUT.

An RG-6 coaxial cable is required for all satellite signal distribution.

		AUDIO OUTPUTS
	FIXED		VARIABLE
L	R	L	R

	EXT SPEAKERS	EXT
+		INT
		+
R		L

HIGH RESOLUTION

INPUT

AUDIO INPUTS

LR

Audio Output Jacks and the External Speakers Jacks and Switch

These jacks are used to connect your TV to an audio receiver or other audio processing component. The two types of jacks you can use for audio output are fixed and variable. You can also connect external speakers directly to the TV, if you want to use the TV’s audio processor.

The FIXED jacks provide fixed-level audio output from the TV. This audio output is ideal for connecting to an A/V receiver when you want to control the volume through the A/V receiver.

Note: If you use the FIXED AUDIO output jacks, you may want to turn off the volume display in the Audio menu.

The VARIABLE jacks provide variable-level audio output. Volume levels are controlled by the volume controls on the TV and remote control.

The EXT SPEAKERS jacks let you connect external left and right speakers to the TV. The EXT/INT switch beside the jacks lets you turn the TV’s internal speakers on or off. EXT sends audio to external speakers only. INT sends audio to the TV’s internal speakers only.

High Resolution Input Jack and Cables

This jack lets you connect your TV to an RGB or component video device

(Y•Pb•Pr). How images are displayed, however, depends on other factors such as the type of device connected to the TV and the media being transmitted.

Notes:

•Remember to connect the left and right audio cables because the high resolution cable carries only the picture signal, not the sound.

•The TV automatically detects when a component is connected to the HIGH RESOLUTION INPUT jack. To connect a component video device to this jack, you need to use the supplied RGB-component video adapter cable. The TV automatically detects and displays the component video signal.

14 Chapter 1