Kyocera KM-NET manual Printing System Settings

Printing System Settings

2-up

4-up

	Note
	If you select Through in Layout, the value of N-up is fixed at 1
	and cannot be changed. Furthermore, if you select Catalog or
	Booklet, the value is fixed at 2 and cannot be changed.
Paper Size	Specifies the paper size applied to the output. The following
	paper sizes are available:
	16K, 8K, A3, A4, A5, A6, Auto, B4, B5, B6, C4, Envelope
	#10, Envelope #6, Envelope #9, Envelope C5, Envelope
	DL, Executive, Folio, Hagaki, ISO B5, Ledger, Legal, Letter,
	Monarch, Oficio II, OufukuHagaki, Statement, Youkei 2 and
	Youkei 4. The default setting is Auto.
Duplex	Sets 2-sided printing. The following modes are available: Off,
	Flip on Long Edge and Flip on Short Edge. The default
	setting is Off.
	Notes
	If you select Catalog or Booklet in Layout, the value of
	Duplex is fixed at the Flip on Short Edge and cannot be
	changed.
	This utility does not automatically recognize whether or not a
	duplex printing unit is present in a printing system. Therefore,
	there is a possibility that the duplex printing settings set here
	may be invalid.
Resolution	Specifies the printing resolution. The following resolutions are
	available: 300, 600, Fast 1200 and Fine 1200. The default
	setting is 600.
KIR	KIR (Kyocera Image Refinement) is a smoothing function that
	enhances resolution, resulting in high-quality printing. The
	default setting is disabled (not checked).
EcoPrint	Enables the printing system to reduce the amount of toner
	consumption to save printing costs. The default setting is
	disabled (not checked).

8 KM-NET for Direct Printing