Kyocera KM-NET manual Detailed Settings

	Detailed Settings
Output to	Specifies the paper output destination.The following
	destinations are available: Auto, Face Up Tray, Face Down
	Tray, Finisher Tray (Face Down) and VMB. The default
	setting is Auto.
	Note
	The setting may be ignored depending on the configuration of
	the printing system.
VMB	This is active when VMB is specified as the Output to
(Virtual MailBox)	destination above. Virtual Mailbox feature, mailboxes created
	on the hard disk are assigned to multiple users. Jobs posted to
	a virtual mailbox can be printed later from the operation panel
	of the printing system.
	Number: specifies the mailbox by the number. the number
	should be 1 to 255.
	Name: specifies the mailbox by the name.
	Note
	The setting may be ignored depending on the configuration of
	the printing system.
Fold	Folds copies for booklet format. The default setting is disabled
	(not checked).
Staple	Staples each copy set. The default setting is disabled (not
	checked).
	When this item is enabled, the combo box is active allowing
	you to select that result. The following staple positions are
	available: Back, Booklet and Front.
Punch	Makes copies hole punched. The default setting is disabled
	(not checked).
	When this item is enabled, the combo box is active allowing
	you to select that result. The following value are available:
	Main Punch Unit and Sub Punch Unit.
	Note
	The setting may be ignored depending on the configuration of
	the printing system.
PDF Password	Enter the password required to print encrypted PDF files. The
	password should be 32 characters maximum.
Quality	You can choose the printing quality, from High Quality to High
	Speed. Move the slider to the left to select a High Speed or to
	the right to select a High Quality. The default setting is center.
	Note
	The setting is enabled only when the PDF file to print is PDF
	version 1.4 or later file and using Transparency Flattenering
	function. Otherwise the setting is ignored.
	PDF version can be confirmed on the window displayed by
	which selecting from File menu > Document Properties >
	Summary.
	Transparency Flattenering function can be confimed on the
	Advanced Print Setup dialog box.

KM-NET for Direct Printing 11