RCA D40W20, D52W20 manual Explanation of Jacks, External Speakers

Connections & Setup

Explanation of Jacks

This section describes the jacks you can use to make connections. There are several ways to connect components to your TV.

L/MONO

DVI-HDTV

R

DVI-HDTV Input Lets you connect an HD receiver with a DVI output.

•DVI (Digital Visual Interface) Provides an uncompressed, digital video interface developed for high-bandwidth digital connection. It supports the overlay of high-resolution graphics needed by some electronic program guide navigation and other interactive services. DVI, when combined with HDCP (High bandwidth Digital Content Protection) technology, creates a protected digital connection. The signal speed of the DVI connection is 1080i for HDTV at a rate of 1.78 Gigabits per second.

•L/MONO (Audio) Provides left audio connection when using the DVI jack. The left audio connector is usually white.

•R (Audio) Provides right audio connection when using the DVI jack. The right audio connector is usually red.

Note: Remember to connect the left and right audio cables because the DVI cable carries only the picture signal, not the sound.

Y	PB	PR	L/MONO	R
				CMP1
				CMP
Y	PB	PR	L/MONO	2
				R

COMPONENT INPUTS

COMPOSITE INPUTS

O	V	L/MONO	R
E			V
D			I
I			D
V			1
-
S
O			V
E
D			I
I			D
V			2
-	V	L/MONO	R
S
	AUDIO/VIDEO OUTPUT
		FIXED AUDIO
	V	L	R

VARIABLE

AUDIO

SUBWOOFER L R

COMPONENT INPUTS Lets you connect a component video source, such as a DVD player.

•CMP1 Y, PB, PR (Component Video) Provides optimum picture quality because the video is separated into three signals. Use three video-grade cables for the connection. When using CMP1

Y, PB, PR, make sure to connect left and right audio cables to the CMP1 L/MONO and R Audio Input jacks.

•CMP1 L/MONO (Audio) Provides left audio connection. The left audio connector is usually white.

•CMP1 R (Audio) Provides right audio connection. The right audio connector is usually red.

•CMP2 Y, PB, PR, and L/MONO and R Audio Allows you to connect a second component video source. Their description is the same as CMP1 above. When using CMP2 Y, PB, PR, make sure you connect the left and right audio cables to the CMP2 Audio jacks.

COMPOSITE INPUTS Lets you connect another component such as a VCR, DVD player, or laserdisc player. Its AUDIO jacks are the same as described for CMP1 above.

•VID1 S-VIDEOProvides better picture quality than the video jacks (VID1 and 2 Video) because the color part of the signal is separated from the black and white part of the picture. When using VID1 S-VIDEO, make sure to connect left and right audio cables to the VID1 L/MONO and R Audio Input jacks.

•VID1 V (Video) Provides composite video connection. The video connector is usually yellow.

• VID2 S-VIDEO, V and L/MONO and R Audio Allows you to connect a component such as a VCR, DVD player, or laserdisc player. Their description is the same as VID1 above.

Note: Do not connect an S-Video and Video cable at the same time in either VID1 or VID2 jacks.

AUDIO/VIDEO OUTPUTS Lets you connect an amplifier or audio receiver for improved sound quality or an external video monitor.

•FIXED AUDIO L/R Provides fixed-level audio output from the TV. This audio output is ideal for connecting to an A/V receiver when you want to control the volume through the A/V receiver.

•VARIABLE AUDIO Provides variable-level audio output. Volume levels are controlled by the volume controls on the TV and remote control.

•SUBWOOFER Provides lower bass audio frequencies out from the TV and to a subwoofer.

Note: If you’ve connected a subwoofer, make sure you set the External Subwoofer option in the Sound menu. Go to page 22 for instructions.

EXT/INT

+ +

RIGHT LEFT

EXTERNAL SPEAKERS

EXTERNAL SPEAKERS

•Right and Left Speaker Terminals Let you connect external left and right speakers to the TV to receive left and right sound.

•EXT/INT (switch) Lets you turn the TV’s internal speakers on or off. EXT sends audio to external speakers only. INT sends audio to the TV’s internal speakers only.

ANTENNA/CABLE Lets you connect a coaxial cable to receive the signal from the antenna, cable, cable box, or if using the examples on pages 6-8, a VCR.

10 Graphics contained within this publication are for representation only. Chapter 1