More information
Troubleshooting tips
Unit does not work.
•Unplug the AC power cord and plug it back in.
No picture on the TV screen.
•Make sure the converter box is turned on.
•Make sure the connections between the converter box and TV are properly done.
•Choose dierent channels or video inputs on the TV set until the picture appears.
No sound.
•Make sure the connections between the converter box and TV are properly done.
•Make sure the TV sound is not muted.
Remote control does not work.
•Make sure the batteries are inserted correctly.
•Replace the batteries if they are exhausted.
•Remove any obstacles between the remote control and the converter box.
•If the remote control works with the converter box but does not work with your TV, reprogram the remote control, following the steps in “Program the remote control”.
Cannot watch a bilingual TV program in its secondary language.
•Make sure you have correctly selected the audio settings. Refer to AV settings in the main menu.
Forgot password.
•Choose “ Ratings ” in the main menu and input the master password “3308”. Create a new password. (The master password cannot be used to unlock programs for viewing.)
The Converter Box has turned o suddenly.
•Check if Auto Power Down Timer is activated in the main menu. It is set to 4 hours by default.
Weak signal or channel not available. | EN |
• Try to reposition the antenna. If the |
|
signal is still weak, a more powerful |
|
antenna may be required to boost |
|
reception for the Digital TV signal. A |
|
Smart Antenna is recommended. |
|
The TV is newly changed to an RCA TV set and the remote control cannot control it.
•Reprogram the remote control, following the steps in “Program the remote control”.
Smart Antenna is newly connected and channel scan is required.
•In the menu, press 5 for Settings and then press 1 for Channel Scan.
TV cannot receive analog channels
•Turn o the converter box (pass through mode) and conrm cables are connecting correctly.
Customer service and technical support
www.1800customersupport.com/RCA
Technical specications
Power supply: AC 120V/60Hz
Power consumption: <1W (standby)
<7W (operating, HD mode)
Remote reception distance: >8m from front
RF freq. range: 57MHz – 830MHz
RF channel range: CH2 – CH69
RF sensitivity:
Output channel: CH3/CH4, selectable
Video system: NTSC
Video output: 1V
Video output impedance: 75 ohms
Audio output impedance: 600 ohms
Unit size (L x W x H): 190 x 140 x 38mm
Net weight: 0.4kg
Dolby and the
Laboratories. Manufactured under License from Dolby
Laboratories.
13
DTA800B1_IB_EN_E_V3
