FCC information
RCA
DTA800B1
Equipment tested for compliance as a complete unit
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Ventilation
Y ou must adequately ventilate the product. M ake sure there is adequate space around the unit to provide proper air flow for ventilation. See diagram.
7 cm |
| 7 cm |
|
10 cm | 10 cm | 10 cm |
|
|
| 7 cm | 7 cm |
10 cm |
| 10 cm | 10 cm |
This converter box has earned the
ENERGY STAR.
2
This symbol indicates that this product incorporates double insulation between the hazardous mains voltage and user accessible parts.
For your safety
The AC power plug is polarized (one blade is wider than the other) and
only ts into AC power outlets one way. If the plug won’t go into the
outlet completely, turn the plug over
and try to insert it the other way. If it still won’t
t, contact a qualied electrician to change the outlet, or use a dierent one. Do not attempt to bypass this safety feature.
Removing the power plug is the only way to completely remove power from your product. Make sure the power plug remains easily accessible.
For your records
Keep your sales receipt for proof of purchase to obtain warranty parts and service.
In the event that service should be required, you may need both the model number and the serial number. In the space below, record the date and place of purchase, and the serial number:
Date of Purchase :
Place of Purchase :
Serial No. :
Important battery precautions
Any battery may present a risk of re, explosion, or chemical burn if abused. Do not try to charge a battery that is not intended to be recharged, do not incinerate, and do not puncture.
•
•If your product uses more than one battery, do not mix types and make sure they are inserted correctly. Mixing types or inserting incorrectly may cause them to leak.
•Discard any leaky or deformed battery immediately. They may cause skin burns or other personal injury.
•Do not expose batteries to excessive heat (for example, by leaving them in sunlight or close to re).
•Please help to protect the environment by recycling or disposing of batteries according to federal, state, and local regulations.
DTA800B1_IB_EN_E_V3
