RCA DVD/VCR manual How to find your TV’s Video Input Channel, Video Input Channel Variations

Additional Information

How to find your TV’s Video Input Channel

In order to see whatÕs playing on your DVD/VCR, you need to tune the TV to the Video Input Channel that corresponds to the jacks you used to hook up the unit to the TV. The Video Input Channel(s) varies for different brands and different models of TVs. Below are some things to try.

¥Consult the OwnerÕs Manual that came with your TV.

¥If you canÕt find the information in the manual, or canÕt find the manual, review the following list of ways to access Video Input Channels on TVs.

¥There might be a button on the TVÕs remote control that accesses the Video Input Channel (see table below for examples).

¥You might select the Video Input Channel from the TVÕs menu system.

¥You might tune to it by pressing a specific channel number (see table below)

¥Press the Channel up and/or down buttons on the TVÕs remote control (sometimes the Video Input Channel is stored in the channel list).

Video Input Channel Variations

Button/Switch on the TV

VIDEO

SIGNAL

VID 1

VID 2

Button on the

TV remote

VID1 S-VID

LINE INPUT

VID SOURCE

VIDEO AUX

Channel

Number

00 93

90VID 1

91VID 2

92INPUT

62 Chapter 6