RCA F19426 manual Buttons on the Remote Control

Connections & Setup

POWER
VOL	GO	CHAN
MUTE	BACK
GUIDE		INFO
OK

MENUCLEAR

1 2 3

4 5 6

7 8 9

INPUT	SKIP
	0

The Buttons on the Remote Control

0-9 (Number buttons) Enter channel numbers and time settings directly through the remote control.

To enter a two-digit channel, press the two digits. To enter a three-digit channel, press and hold the first digit for two seconds until two dashes appear to the right of the number, then add the second two. Example: to tune to channel 123, press and hold 1 for two seconds, press 2, then press 3.

Arrow buttons (up, down, left, right) Press the arrow buttons to move through the on-screen menu system.

CHAN (up and down) buttons Scan up or down through the current channel list. Press once to change the channel up or down; press and hold to continue changing channels.

CLEAR Removes any menu or display from the screen and returns you to TV viewing.

GO BACK Returns you to the previous channel.

GUIDE Press GUIDE to make the GUIDE Plus+ system appear on the screen. Press GUIDE again to remove it from the screen.

INFO Displays channel information.

INPUT Changes your TV to its Video Input Channel (VID/FRNT and the current channel). The Video Input Channel is the channel your TV must tune to in order for you to access a component that’s connected to your TV’s VIDEO and AUDIO jacks. Example: to view a tape from your camcorder, connect the camcorder to the TV’s AUDIO and VIDEO jacks with the audio/video cables.

MENU Displays the TV’s Main menu. You can also press and hold for 2 seconds to display the GUIDE Plus+ system.

MUTE Lowers the volume to its minimum level. Press again to restore volume.

OK When a menu is on the screen, press OK to select the item that is highlighted.

POWER Turns the TV on and off.

SKIP If you press this button before you change the channel, the TV waits 30 seconds and automatically goes back to the original channel. Each time you press SKIP, you add 30 seconds (i.e, if you press SKIP two times before you change the channel, the TV waits 60 seconds and automatically turns back to the original channel). When you reach four minutes and thirty seconds, pressing SKIP adds one minute.

VOL (up and down) buttons Decrease or increase the TV’s volume.

20 Chapter 1

15720240.01 Setup 20 4/9/02, 1:00 PM