![](/images/new-backgrounds/1125396/12539689x1.webp)
Additional Information
VCR Button |
| TV Button | Finding the TV’s Video Line Input |
|
| ||
VCR1 ON•OFF | TV |
| Channel |
|
|
|
| DVD | VCR2 | AUX | SAT•CABLE | |
| MUTE |
|
|
| SKIP |
|
| CH + |
|
| |
| VOL |
|
|
| VOL |
|
|
| CH |
|
|
| SOUND |
|
|
| GO BACK |
| GUIDE |
|
|
| INFO |
|
|
| OK |
|
|
| MENU |
|
|
| CLEAR |
| 1 | 2 |
| 3 |
|
| 4 | 5 |
| 6 |
|
| 7 | 8 |
| 9 |
|
INPUT | INPUT |
|
| ANTENNA | |
| 0 |
|
|
| |
Button | REVERSE | PLAY | FORWARD | ||
| RECORD | STOP |
| PAUSE | |
| PIP SWAP | CH CTRL | RESET |
You need to tune your TV to the video line input channel if you’re using the Audio/Video (A/V) IN jacks to connect to the other components (such as a cable box, a VCR, satellite receiver, or DVD player).
You must select the TV’s video line input channel before you can see the video and hear the audio from another component you have connected to these jacks.
To access the video line input channel:
•Press the TV button on the remote.
•Press INPUT to select LINE 1 for the LINE IN/IN1 input jacks on the back of the TV.
•Press INPUT again to select LINE 2 for the VIDEO, L/MONO, and R input jacks on the front of the TV.
•Press INPUT a third time to select LINE 3 for the VIDEO, L/MONO, and R input jacks on the front of the TV.
•Press INPUT a fourth time to select COMPONENT for the
Care and Cleaning
CAUTION: Turn OFF your TV before cleaning.
You can clean the TV as required, using a soft
The TV screen may be cleaned with a soft,
Never use strong cleaning agents, such as
While cleaning, do not spray liquid directly on the screen or allow liquid to run down the screen and inside the TV. Also, avoid placing drinks or vases with water on top of the TV. This could increase the risk of fire or shock hazard or damage to the TV.
Caution: If fixed
Chapter 5 | 43 |
F27TF12.05 Other | 43 | 7/19/01, 3:39 PM |