Connections & Setup
Connection: TV + VCR + Satellite Receiver
1.Connect your satellite receiver to your VCR
A.Connect the audio/video cables. Connect the audio cables (white and red) to the Audio Input jacks on the VCR (sometimes labeled AUDIO IN L and R) and to the Audio Output Jacks on the satellite receiver (sometimes labeled OUT L and R).
B.Connect the video cable (yellow) to the Video Input jack on the VCR (sometimes labeled VIDEO IN) and to the Video Output Jack on the satellite receiver (sometimes labeled VIDEO OUT).
C.Connect a coaxial cable from the satellite receiver’s OUT TO TV jack and to the Antenna Input jack on the VCR (sometimes labeled ANT IN).
2.Connect coaxial cables to the satellite receiver
A.Connect the coaxial cable from your cable feed or antenna to the Input Jack on your satellite receiver (sometimes labeled IN FROM ANT).
B.If it’s not already connected, make sure you connect the coaxial cable from your satellite dish antenna to the Input Jack on your satellite receiver (sometimes labeled SATELLITE IN).
3.Connect your VCR to your TV
A.Connect a coaxial cable to the Output Jack (sometimes labeled RF OUT) on the VCR and to ANT/CABLE jack on the TV.
B.Connect audio/video cables. Connect audio cables to the Audio Output jacks on the VCR, and to the IN 1 AUDIO L and R jacks on the TV. Connect the video cable (yellow) to the Video Output jack on the VCR, and to the IN 1 VIDEO jack on the TV.
Go to page 12
Chapter 1 | 11 |
F27TF12.01 Setup | 11 | 7/19/01, 3:38 PM |
