SETUP AND CONNECTIONS

ADVANCED CONNECTIONS

Advanced connections give you better sound and video by separating the audio and video signals and enabling you to connect multiple components.

This section describes the types of inputs available on the back of your TV and suggests ways you can use them for optimum performance.

Once you have made your connections, you will need to program the TV to tune to the correct video input channel in order to see and hear audio and video from a component such as a VCR or DVD player. You will program this later in the Interactive Setup.

Back of the TV

The diagram below describes each of the back panel jacks. When connecting A/V cables, be sure to connect corresponding OUTPUTS and INPUTS (Video to Video, Right Audio to Right Audio, etc.).

VIDEO and Audio Inputs

Connect any one of the following components:

• VCR

• Internet Access Device

• Laserdisc Player

• DVD Player

Satellite Receiver

To view the component connected to VIDEO, use the WHO•INPUT button on the remote.

Audio Outputs

Connect to an audio receiver or amplifier for variable controlled or fixed level stereo output.

VIDEO

 

AUDIO

R

L / MONO

 

IN

VCR

CONTROL

RL

OUT

CABLE/

ANTENNA

S-VIDEO

VCR Control

Connect the GUIDE Plus+ Gold system IR controller for one-button recording and channel tuning from the GUIDE Plus+ Gold system.

S-Video

This optional connection can be used for better video quality picture.

Cable/Antenna

Takes the signal input from a cable, cable box, or an off-air antenna. Can also be used for basic component connections.

6

Page 8
Image 8
RCA G27669 manual Advanced Connections, Back of the TV