RCA J13804CL manual Picture Menu, Setup Menu

Chapter 3: Using the TV’s Menu System

PICTURE
Go back
Color		45
Brightness		50
Contrast		50
Sharpness		50
Tint	±	0
Blue Background		On
C. Temp		Cool

SETUP

Go back

Auto Channel Search

Closed Caption

Favorite Channel
Language	Eng.
Format	Normal
Auto Vol. Level	Off

AUTO CHANNEL SEARCH

Go back

Source Type Cable

Start Search

Picture Menu

The PICTURE menu options apply to the video for the main TV and Video Input Channels. As you scroll through the options available, the background image will change to fit that choice. Choose the setting that is best for your programs.

Press the left or right arrow button to toggle among the choices listed below:

Color  Adjusts the richness of the color. Brightness  Adjusts the brightness of the picture.

Contrast  Adjusts the difference between the light and dark areas of the picture.

Sharpness  Adjusts the crispness of the edges in the picture. Tint  Adjusts the balance between the red and green levels.

Blue Background  Choose On and a solid blue background will appear when the TV is on a weak channel (for example, if the reception is very poor or if the station has gone off the air for the night). After being on such a channel for 15 minutes, the TV will turn itself off automatically.

Color Temperature  Press the VOL +/– buttons to scroll through the color adjustments:

Cool  For a more blue palette of colors. Normal  Standard picture color. Warm  For a more red palette of colors.

When you change any of these picture settings, the Picture Preset changes to Personal. Use the VOL +/– buttons to make adjustments.

Setup Menu

Auto Channel Search  Allows you to choose your signal type and begin automatically searching for available channels.

Press the left or right arrow button to choose among the signal sources below:

Antenna   If you have connected an antenna to the ANTENNA/CABLE INPUT, choose Antenna. Refer to page 6 for a complete explanation of these connections.

Cable   If you have connected cable to the ANTENNA/CABLE INPUT, choose Cable. Depending on which package you have you can receive analog, digital or both stations. Refer to page 5 for a complete explanation of these connections.

After you have made the selections above, use the CH- button to highlight Start Search.

Start Search  Press the VOL+ button to start the search. Searches for channels the TV is receiving and stores them in the channel list. Shows the percent of channels being searched. After the search is complete, shows the total percent of stations that have been found. Go to page 8 (Auto Channel Search) for more information.

Continues on next page...

Chapter 3 15