RCA J22H760 manual Using USB Clone Tool, Learning 22inch, Learning 26/32 inches

Chapter 3: Using USB Clone Tool

Learning - 22inch

Copying settings out of TV.

Rear panel of the set

SERVICE	SPEAKER		ZEN PLS OFF RCA	PILLOW JACK IN
	NORMAL SWITCH PILLOW
	SPEAKER	SPEAKER	AUDIO IN	ANTENNA/
			(RGB/DVI)	CABLE IN
		AV1
	VIDEO	L	AUDIO R

1.	Turn TV on.
2.	Connect USB Cloner to TV USB Port.
3.	Set switch to “learning” position.

2.5mm Stereo Cable (cross data cable)

Teaching

Learning

Side panel

USB IN	of the set
	R
AV2
H/P

USB Cloner

	(Status LED will Light red without flashing.)
4.	Connect 2.5mm Stereo Cable (cross data cable)
	between the TV service port and the USB Cloner
	service port.
5.	Press the Learn button for 1 second. As soon as
	the LED turns green, release the button.
6.	The LED will turn Red and flash while the settings
	are being saved to the USB Key. Upon successful
	copy, the LED will light up yellow for 2 seconds
	and then return to a red, constantly lit state.
	Upon an unsuccessful copy, the LED will flash an
	error code as described in the “Error Table” sec-
	tion.

Note : New TV Settings file, “ChList.bin” will appear on the USB Cloner .

Learning - 26/32 inches

Copying settings out of TV.

Rear panel of the set

DIGITAL AUDIO	SERVICE	SPEAKER		PILLOW JACK IN
OUT(COAXIAL)		SWITCH	ZEN PLS OFF RCA

NORMAL PILLOW

SPEAKER SPEAKER

Side panel

	USB IN	of the set
2.5mm Stereo
		VIDEO
Cable (cross
data cable)	AV2

Teaching

USB Cloner

Learning

1.Turn TV on.

2.Connect USB Cloner to TV USB Port.

3.Set switch to “learning” position.

(Status LED will Light red without flashing.)

4.Connect 2.5mm Stereo Cable (cross data cable) between the TV service port and the USB Cloner service port.

5.Press the Learn button for 1 second. As soon as the LED turns green, release the button.

6.The LED will turn Red and flash while the settings are being saved to the USB Key. Upon successful copy, the LED will light up yellow for 2 seconds and then return to a red, constantly lit state. Upon an unsuccessful copy, the LED will flash an error code as described in the “Error Table” sec- tion.

Note : New TV Settings file, “ChList.bin” will appear on the USB Cloner .

36 Chapter 3