RCA J22H760 manual Learning 42inch, Teaching

Chapter 3: Using USB Clone Tool

Learning - 42inch

Copying settings out of TV.

Side panel of the set

1. Turn TV on.

	PILLOW JACK IN
	RCA
	OFF
	PLS
NORMAL PILLOW SPEAKER SPEAKER	ZEN
	SPEAKER SWITCH

R	Side panel of
-	the set
L - AUDIO
	AV2
VIDEO		USB Cloner
USB IN

Teaching

2.	Connect USB Cloner to TV USB Port.
3.	Set switch to “learning” position.
	(Status LED will Light red without flashing.)
4.	Connect 2.5mm Stereo Cable (cross data cable)
	between the TV service port and the USB Cloner
	service port.

SERVICE

2.5mm Stereo Cable

(cross data cable)

Learning

5.	Press the Learn button for 1 second. As soon as
	the LED turns green, release the button.
6.	The LED will turn Red and flash while the settings
	are being saved to the USB Key. Upon successful
	copy, the LED will light up yellow for 2 seconds
	and then return to a red, constantly lit state.
	Upon an unsuccessful copy, the LED will flash an
	error code as described in the “Error Table” sec-
	tion.

Note : New TV Settings file, “ChList.bin” will appear on the USB Cloner .

Teaching

Placing settings into TV.

22/26/32 inches 42 inch

1. Connect USB Cloner to TV USB Port.

Side panel of the set

Teaching

Learning

USB IN

R

AV2

H/P

USB Cloner

L - AUDIO - R	AV2
VIDEO
USB IN

Side panel of the set

USB Cloner

Teaching

Learning

2.	Set mode switch to “teach”.
	(Status LED will flash red)
3.	Unplug the TV from the power outlet.
4.	Plug the TV back into the power outlet.
	TV settings will be copied into television.

Note : TV Settings file “ChList.bin” should be present on USB clone device for teaching function to work properly. Refer to “Learning” section for details.

Chapter 3 37