RCA l22HD34DB Setting the on-screen language, Memorizing channels, Air/Cable selection, Enter

Press POWER.

Press TV/DVD to select TV mode.

Press SETUP/TV MENU. The TV menu screen will appear.

Automatic Search

Start

Signal Type

Cable

Language

English

Starting setup

The Starting Setup menu appears the first time you turn on the TV, and assists you to select the menu language, specify the Air/Cable setting, and program your channels automatically.

IMPORTANT: Make sure that the antenna or cable TV system connection is made!

1 To turn on the TV, press POWER (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.). The starting setup function begins. Press ◀ or ▶ to select your desired language.

Auto Setup

: Select : Adjust

2 Press ▲ or ▼ to select “Signal Type”, then press ◀ or ▶ to select “Cable” or “Air”.

3 Press ▲ or ▼ to select “Automatic Search”, then press ▶ or ENTER.

4 Now the “Auto Setup” starts. After the starting setup is completed, the TV channel appears on the screen.

•Depending on the reception condition, it may take from 15 minutes to 30 minutes to complete memorizing digital cable channels. Please be patient.

NOTE:

• If you press EXIT/CANCEL in the process of “Auto Setup”, the Starting Setup stops and changes to the normal screen.

• When you make a menu selection, your changes occur immediately.You do not have to press EXIT/ CANCEL to see your changes.

• When you are finished programming the menus, press EXIT/CANCEL.

Setting the on-screen language

You can choose from three different languages (English, French and Spanish) for the on-screen displays.

Select the language you prefer first, then proceed with the other menu options.

1

2

3

52D0201A_EN.indd 15

Main Menu

Picture>>

Audio

Channel

Lock

Setup

: SelectENTER:Set

4 Press ▲ or ▼ to select “Setup”, then press ▶ or

ENTER.

5 Press ▲ or ▼ to select “Language”.

Setup

Closed Caption	>>
Language	English
Video Label	>>
Auto Shut Off	Off
Reset	>>

: Select : Adjust

6 Press ◀ or ▶ to select the desired language: English, French (Français) or Spanish (Español).

7 Press EXIT/CANCEL to return to the normal screen.

NOTE:

• If no buttons are pressed for more than about 60 seconds, the menu screen will return to normal operation automatically.

Memorizing channels

This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna, set the Signal Type option to the Air mode. When shipped from the factory, this menu option is in the Cable mode.

Air/Cable selection

1 Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2 Press ▲ or ▼ to select “Channel”, then press ▶ or ENTER.

3 Press ▲ or ▼ to select “Auto Ch Memory”, then press ▶ or ENTER.

4 Press ▲ or ▼ to select “Signal Type”. 5 Press ◀ or ▶ to select “Air” or “Cable”.

Air - VHF/UHF channels

Cable - CABLE TV channels

Auto Ch Memory

Signal Type	Cable
Automatic Search	Start

: Select : Adjust

6 Press EXIT/CANCEL to return to the normal screen.

15

6/12/09 1:44:29 PM