RCA L32HD35D, L26HD35D owner manual Returning to the scenes, To cancel the mark

NOTE:

• If the desired language is not heard after pressing AUDIO several times, the language is not recorded on the disc.

• Changing soundtrack language is cancelled when you eject the disc.

The initial default language or available language will be heard if the disc is played back again.

2 Press AUDIO repeatedly until the desired language is selected.

The on-screen display will disappear after a few seconds.

You can select the language when you play a multilingual disc.

1 Press AUDIO during playback.

The current soundtrack language will appear.

1/2 Eng Dolby Digital

Changing soundtrack language

NOTE:

• The marking is canceled when you eject the disc or turn the power off.

• Some subtitles recorded around the marker may fail to appear. [DVD]

The TV/DVD stores the points that you want to watch again. You can resume playback from that scene.

Marking desired scenes

NOTE:

• Some discs may not work with the repeat operation.

• In A-B repeat mode, subtitles near point A or B may not appear.

• During the A-B Repeat Playback the ANGLE feature will not operate.

• You may not be able to set A-B Repeat, depending on the scenes of the DVD.

• A-B Repeat does not work with an interactive DVD, MP3/WMA/JPEG-CD.

3 To resume normal playback press REPEAT A-Bagain.

“ Off” appears on the screen.

A-B Repeat Playback:

A-B repeat playback allows you to repeat material between two selected points.

1 Press REPEAT A-Bduring playback. The start point is selected.

A

2 Press REPEAT A-Bagain.

The end point is selected. Playback starts at the point that you selected. Playback stops at the end point, returns to Point A automatically, then starts again.

A B

Marking the scenes:

1 Press MARKER during playback.

2 Select the blank Marker using ▲ or ▼, then press ENTER at the desired scene.

Marker 1 00 27 54

Marker 2

Marker 3

•Up to 3 scenes can be selected.

•Repeat this procedure to set the other 2 scenes.

3 Press MARKER to remove this display.

Returning to the scenes:

1 Press MARKER during playback or stop mode. 2 Press ▲ or ▼ to select the Marker 1-3.

Marker 1	00	27	54
Marker 2	01	16	25
Marker 3	02	08	31

3 Press ENTER.

Playback starts from the marked scene.

To cancel the mark:

1 Press MARKER during playback or stop mode. 2 Press ▲ or ▼ to select the Marker 1-3.

3 Press CANCEL.

Press MARKER to remove this display.

31

52K0101A_eng.indd 31

3/12/09 3:11:05 PM