English

5
Safety Bar
Padlock (optional,
not included)
Specifi cations
Display Size: 26” to 40”
Maximum Load: 45 kg (100 lbs)
Universal VESA Mounting Patter n: 400 mm x 400 mm
(15.7” x 15.7“) max
Tilt Range: 15° down
Profi le: 4.5 cm (1.8”)
Operation and Adjustment
To change the tilt angle of y our display: Ho ld the display fi rmly with one hand and rotate one of the tilt
adjustment knobs towards the disp lay to unlock the tilt. Carefully m ove the display to the desired pos ition and
return the knob to its original pos ition to lock it in place. Do not r elease the disp lay until the ti lt is locked in
place.
Periodically clean your mou nt with a dry cloth. Inspect a ll screws and hardware at regul ar intervals to ensure that
no connections have become loos e over time. Re-tighten as neces sary.
Fig.13
Final Installation
1. With the help of another person, carefully lift your display and place it on the wall plate. Do not release the
display until the mount arms have securely hooked onto the wall plate.
2. Insert the safety bar at the bottom of the mount to
prevent the display from being lifted from the wall
plate. A padlock can be inserted into the end of the
bar to help prevent theft of your display (see Fig.13).
IMPORTANT! The safety bar must be used at all
times to prevent the display from being accidentally
knocked from the mount.