flat panel solutions
Tilt Wall Mount for LCD, Plasma, and LED Displays
Instruction Manual
MST65BKR
Fits TVs 37”- 65”
Maximum Load
Capacity – 165 lb (75kg)
Specifications
Display Size: | 37” to 65” |
Maximum Load: | 165 lb (75kg) |
Mounting Pattern: | 800 mm x 500 mm (31.5” x 19.7”) max |
Tilt Range: | 15° down |
Profi le: | 1.4” (3.5 cm) |
Box contents
Upper Wall Plate (x1)
Lower Wall Plate (x1)
Left Plastic Side (x1)
Right Plastic Side (x1)
Mount Arm (x2)
Instruction Manual (x1)
Hardware Kit (x1)
Template (x2)
Warnings
1.Read these instructions before you begin. If you are unsure of any part of the process, contact a professional contractor or installer for assistance. Improper installation can result in injury or damage.
2.The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; if not, the structure must be reinforced.
3.Locate pipes, wires, or any other hazards in the wall where you wish to install the mount before drilling.
4.Safety gear and proper tools must be used. Failure to do so can result in injury or damage.
5.A minimum of two people are required for installation. Do not attempt to install this mount alone under any circumstances.
6.Follow all instructions and recommendations regarding adequate ventilation and suitable locations for mounting your display. Consult the owner‘s manual for your particular display for more information.
CAUTION:
This wall mount is intended for use only with the maximum weight of 75 kg (165 lbs). Use with heavier than the maximum weights indicated may result in instability causing possible injury.
Pour des instructions en français, se reporter à la page 6.
Para obtener instrucciones en español, consulte la página 11.
Continues on next page...
