RCA P46920BL manual Plug in the TV, Place batteries in remote, Turn on the TV, Program the TV

Setup and Connections

Step 4: Plug in the TV

Plug the end into the wall outlet, matching the wide blade of the plug with the wide slot in the outlet. Be sure to insert the plug completely.

Step 5: Place batteries in remote

•Remove the battery compartment cover from the back of the remote.

•Insert fresh batteries. Make sure that the polarities (+ and -) are aligned correctly.

•Replace the cover.

Step 6: Turn on the TV

Press TV on the remote, or press POWER on the TV itself.

Pressing the TV button not only turns on the TV, but puts the remote into TV mode, so that the buttons on the remote will control TV functions.

On-Screen Program Guide

The TV is designed to bring up the GUIDE Plus+ on-screen program guide when you use the TV button on the remote to turn on the TV (after you have set up the GUIDE Plus+ system). For more information, see the GUIDE Plus+ Features & Setup booklet.

To get out of the Guide:

•Press OK to tune to the highlighted channel.

•Press GUIDE to tune to the channel displayed in the View window.

•Press CLEAR to remove the guide from the screen and go to the last channel you were watching.

VCR1	ON OFF	TV
		TV
DVD	VCR2 AUX	SAT CABLE
MUTE		SKIP
	CH +
L		V
O		O
V		L
	CH -
SOUND		GO BACK
GUIDE		INFO

Step 7: Program the TV

Proceed to the next section, Interactive Setup. The interactive setup routine walks you through the steps needed to fully configure the TV. The first steps ask you to select your preferred language for the menu system and to begin the auto channel search, which puts available cable TV or antenna signals into the TV’s memory.

Projection TV Convergence

If the picture appears to have a double or triple image or if you notice rings or halos around objects, you may have to adjust the color convergence. Details can be found under the Screen menu heading in the Features and Menus section of this manual.

10