RCA ProV712 Use and Care, Precautions, ∙ Avoid magnetic sources, ∙ Avoid shocks and dropping

Use and Care

Precautions

∙After operation, remove the battery pack from the unit.

∙Do not aim the lens at the sun.

Do not allow direct sunlight to strike the Camcorder lens or LCD panel, whether recording is in progress or not, as it may damage the CCD sensor or LCD panel surface. Be particularly careful when recording outside.

∙When shooting in dark places, avoid sudden brightly lit objects or light sources, such as the sun. Otherwise, the image may white out. Should this happen, point the camera in a different direction until the picture returns to normal.

∙Avoid magnetic sources.

Using the Camcorder near strong fluorescent lights, motors, televisions, or other magnetic sources may adversely affect recorded images.

∙Remember to remove the cassette tape, turn off the power, and remove the battery pack when the Camcorder is not in use.

∙Using the Camcorder near a broadcasting station or other powerful transmission source may cause buzzing or picture deterioration.

∙Avoid shocks and dropping.

Do not drop or otherwise subject the Camcorder to hard shocks or strong vibrations. Bumping or striking the unit during recording will generate noise in the recorded image.

∙Watch the temperature and humidity.

You can use your Camcorder at 0°C to +40°C (32°F to 104°F), and at 30% to 80% relative humidity. Do not store the unit in an unventilated car in the summer, in direct sunlight, or near strong heat sources; this can result in severe damage to the unit’s casing and circuitry. Be careful when handling the unit after it has been left in a hot place, such as the ones described above.

∙Avoid situations where water, sand, dust or other foreign matter could get on or inside the Camcorder. Such substances could cause malfunctions.

Do not use your Camcorder in areas with excessive smoke or steam.

Do not leave your Camcorder in areas with excessive dust or moisture.

Such environments can cause mildew to form on this unit’s lenses. Be sure to provide ample ventilation.

∙Some small, portable tripods may be difficult to attach and may not be sturdy enough to support your Camcorder. Be sure to use only a strong, stable tripod.

∙When you use the Camcorder at a ski resort or in some other cold environment, the LCD monitor screen may get cold giving you an image which is less bright than normal for a while after it is turned on. This is not a malfunc- tion. If this occurs, put the Camcorder in a warmer location for some time before use. To prevent excessive cooling, wrap the Camcorder in a thick cloth (a blanket, etc.).

References

25