Before you begin
Plugging in for power
•Connect the supplied power adapter to the unit’s Power jack, and connect the other end to a convenient wall outlet.
•Once connected with power, the clock flashes. Refer to the “Clock” section and follow the instructions to set the clock time.
General controls
Top view
Front view
Display
Clock
Setting clock
Rear view
FM antenna Power
POWER – Connect to the power adapter
Auto time synchronization
Radio
Listening to the radio
To turn on or off radio:
•In standby mode, press and hold SOURCE to switch to radio mode.
•Press and hold SOURCE to return to standby mode.
To tune frequency:
•In radio mode, press 
/ 
. The selected frequency shows on the display.
•Press and hold 
/ 
to automatically search for the previous/next available station.
FM Antenna
This unit is equipped with an FM antenna at the back. Uncoil the antenna to its full length for best reception. Tape the end of the antenna onto the wall if
To recall a preset station:
1. In radio mode, press RECALL.
•The existing preset station number shows on the display.
2.Press RECALL repeatedly to select a desired preset station. The station number changes by a faster rate when you press and hold the button.
iPod/iPhone
Listening to iPod/iPhone
To connect iPod/iPhone:
Place your iPod/iPhone on the universal dock for iPod/iPhone.
To select iPod mode:
•In standby mode, press and hold SOURCE to turn on the unit. Press SOURCE until iPod is displayed.
•Playback from the iPod/iPhone starts automatically.
•If no iPod/iPhone is connected in the iPod mode, the unit will exit the iPod mode and return to standby mode.
To control the playback:
1. During playback, press |
|
|
| to pause |
|
| |||
the playback and press again to | ||||
resume. |
|
|
|
|
•To turn on the unit, press and hold
SOURCE.
SOURCE – Press to select source; press and hold to turn the unit on or to standby mode.
STORE – In radio mode, store radio stations as presets. In standby mode, press and hold to set the clock time.
/ 
– Search radio frequencies; skip or search music file in iPod/iPhone; adjust clock time and wake time.
VOL+/ 
ON/OFF – In radio or iPod mode, increase volume. In standby mode, press to turn on/off alarm 1 or press and hold to set alarm 1.
– Play/pause when in iPod/iPhone mode. In radio mode, switch to iPod/ iPhone mode.
RECALL – Recall preset stations
ON/OFF – In radio or iPod mode, decrease volume. In standby mode, press to turn on/off alarm 2 or press and hold to set alarm 2.
SNOOZE/SLEEP – Turn off the wake function momentarily; set sleep time. Refer to “Sleep function”.
1.In standby mode, press and hold STORE until the hour flashes on the display.
2.Press 
/ 
to adjust the hour time. Indicator beside PM lights when the time is set to PM. Press STORE to shift to minute time.
Press 
/ 
to adjust the minute time and then press STORE to save. The time decrements or increments follow a faster rate when you press
and hold the 
/ 
.
3.To save and exit the clock setting, wait for about 5 seconds or press STORE until the hour and minute stop flashing.
Each time an iPhone/iPod is docked, the clock would automatically synchronize with the iPhone’s or iPod’s time.
When docking an iPhone/ iPod,
•the clock will be synced to the iPhone.
•the time on your iPhone is provided by your mobile phone service. The time on your iPod is provided from iTunes during the last connection to your computer. Please note that it is possible to have up to 59 seconds time difference between your RCA clock display and your iPhone or iPod time display.
possible to improve reception.
Station presets
To store a station as preset:
1.Tune to a radio station.
2.Press STORE, an available preset location (e.g. P01) shows on the display.
3.Press 
/ 
to select a desired preset location (01 - 20).
4.Press STORE. You can save up to 20 preset stations.
2. Press | / | to skip to the |
previous or next file.
•Press and hold 
/ 
to search backward or forward on the current playback content.
To charge the iPod/iPhone:
•You may charge the battery of your iPod/iPhone through the universal dock for iPod while the unit is in standby mode, radio mode or iPod mode. Charging control should be operated on the iPod/iPhone.
