If Waking to iPod/iPhone ( 
, 
) is selected:
3.Adjust the volume to your desired level. The last played file on the iPod/iPhone will be played when the wake function activates.
4.Press OFF to turn off the unit.
Note: If there is no iPod/iPhone connected, the alarm tone will sound instead even if Waking to iPod mode is selected.
• When the wake function activates, the corresponding wake
icon will flash until the wake function is turned off. The icon will then stop flashing and keep lighting up.
•When the AC power is disconnected, all wake mode will be reverted to alarm tone.
Turn off the wake function
To silence the wake function momentarily:
•Press SNOOZE. The alarm will sound again when the snooze period is over. (refer to “SmartSnoozeTM”).
OR
To stop the wake function:
•Press OFF. The alarm will be on again the following day at the same time.
OR
To disable the wake function completely:
•Press WAKE 1 or WAKE 2
repeatedly until no corresponding
wake indicator ( 
, 
, 
or 
, 
, 
) shows on the display.
SmartSnoozeTM
This operation allows extra sleep time when the alarm sounds. The alarm will be silenced by pressing SNOOZE, VOL +, VOL
To set the “quiet” period with Snooze:
While pressing SNOOZE, press << or
>>on the top of the unit to set the “quiet” period from 1 to 30 minutes (default: 9 minutes). Then release SNOOZE to save the setting.
Sleep function
In the sleep mode, the radio, iPod or AUX mode turns off automatically.
To set the sleep time:
1.Press SLEEP repeatedly to cycle among the sleep time available (90min, 60min, 30min, 15min and OFF. 90min is the default setting).
• The icon 
flashes while selecting.
2.When the desired sleep time is selected, release SLEEP and wait for about 5 seconds, the sleep time is now set.
• The icon 
lights on the display.
To listen to the radio:
•The radio turns on by default. If not, press RADIO and select a radio station as usual.
To listen to the iPod/iPhone:
•Press iPod and then press << or >> to select a file on the iPod/iPhone. Playback will be in repeat all files mode automatically.
•If iPod mode is selected in your last sleep mode setting, the iPod/iPhone will start to play, instead of the radio.
•The radio will be played whenever the iPod mode is selected but without an iPod/iPhone connected.
To listen to the auxiliary player:
•If an auxiliary player (e.g. mp3 player) is connected, press AUX to select AUX mode and start playback on your auxiliary player.
To change or check the remaining time in sleep mode:
•Press SLEEP once to check the remaining sleep time. Press SLEEP repeatedly to select another sleep time.
To cancel the sleep mode:
•If you decide to turn off the unit sooner, press SNOOZE, OFF or press SLEEP repeatedly to select “OFF”.
